• Reproduces The Look Of Cadmium Plating


• Use On Hood Hinges, Door Latches, Carburetor Rods &
  More


• 12 Oz. Can


• Cannot Be Shipped By Air

Learn More

Once you have those lines all bent & ready to install, you might find that they are off a tiny bit. Grab the newest tool we are offering & with a slight turn of the wrist you can fit that brake line up perfectly.

Learn More

This versatile spray can be used along with our sound deadener sheets or firewall insulation to fill in gaps between panels. Gets into those hard to reach places.


The rubberized formula will protect, seal & insulate your floor, rocker panels or anywhere that air, noise or water could enter.


Stays flexible, excellent for protecting inner fenders from stones & chips.

Learn More

• Gloss Black Like Many Original Radiator Finishes


• 12 Ounce Spray Can


• Heat Dissipating Formula


• Quick Drying


• Heat Resistant To 300 Degrees Farenheit

Standard engine paints are too thick for radiator use because they can interfere with heat transfer, and block air flow between the cooling fins. They also tend to flake off radiator tanks. Radiator Black helps solve this problem.  The durable enamel formulation resists temperatures up to 300ºF, gasoline, and chipping. One can covers 6 square feet (most radiators require 2 cans).  Just make sure your radiator is clean and dry, has no flaking paint, and no oil on the surface.  Several thin coats followed by a final thicker coat will result in the best finish.  Don't put too much on the fins as this can limit your radiator's natural air flow.  The quick-drying formula will limit the time you will have to wait to reassemble your ride.  We also have a satin version of this same paint.

Learn More

• 5 Ounce Spray Can
  
   
  

Newly reformulated Carb Renew2 has better fuel resistance and durability than the original formula, but still maintains that factory silver look - Restore the OEM look found on just about any carburetor. Carb Renew2 is a translucent acrylic enamel that is resistant to fuel and most additives. (Please read and follow label instructions carefully.) While your carburetor is apart and all jets are removed, simply spray Carb Renew2 on the exterior of the thoroughly cleaned bowl cover and main body. Produces a natural 3-8% gloss. Carb Renew2 comes in a 5 oz. aerosol, enough to cover about 2 sq.ft.

Learn More

• Converts Encapsulates & Seals Rust On Internal Surfaces


• Phenolic Resin With Zinc Additive Eliminates Further Corrosion


• Can Used In Several Places Such As Doors, Etc...

Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. This formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use, must have product, that is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection. Fully cures in 24 hours.

Learn More

Learn More

• High Quality


• Polish & Protect

Autosol Headlight Polish & Protection Kit Gently Cleans, Restores, And Protects Plastic Headlamps In Just 2 Steps: Step 1 - Polish & Step 2 - Protect. The Kit Contains Everything You Need to Bring New Life to Your Plastic Headlamps. The Kit Includes A Tube Of Autosol Headlamp Polish (75ml Tube), A Spray Bottle Of Headlight Care Protectant (200ml Spray Bottle), Micro-Fiber Cloth, And Detailed Instructions.

Learn More

• Satin Black Like Many Original Radiator Finishes
  
• 12 Ounce Spray Can
  
• Heat Dissipating Formula
  
• Quick Drying
  
• Heat Resistant To 300 Degrees Farenheit

Standard engine paints are too thick for radiator use because they can interfere with heat transfer, and block air flow between the cooling fins. They also tend to flake off radiator tanks. Radiator Black helps solve this problem.  The durable enamel formulation resists temperatures up to 300ºF, gasoline, and chipping. One can covers 6 square feet (most radiators require 2 cans).  Just make sure your radiator is clean and dry, has no flaking paint, and no oil on the surface.  Several thin coats followed by a final thicker coat will result in the best finish.  Don't put too much on the fins as this can limit your radiator's natural air flow.  The quick-drying formula will limit the time you will have to wait to reassemble your ride.  We also have a gloss version of this same paint.

Learn More

Newly reformulated Carb Renew2 has better fuel resistance and durability than the original formula, but still maintains that factory bronze look - Restore the OEM look found on just about any carburetor. Fuel-Resistant Formula Replicates Original Zinc Chromate Plating Produces a natural 3-8% gloss Average Coverage 2 sq. ft. Carb Renew2 is a translucent acrylic enamel that is resistant to fuel and most additives. (Please read and follow label instructions carefully.) While your carburetor is apart and all jets are removed, simply spray Carb Renew2 on the exterior of the thoroughly cleaned bowl cover and main body. Carb Renew2 comes in a 5 oz. aerosol, enough to cover about 2 sq.ft.
Learn More

• Warranty: 90 days


• Content: 6 Fl. Oz Plus 3 Free Brushes

Rubber & Vinyl Restore is a unique formula that actually rejuvenates and restores dried out rubber and vinyl. Its deep penetrating formula restores elasticity and conditions rubber & vinyl, keeping it pliable for a long time. Restoring it saves you the expense of replacing costly weather-stripping, vinyl tops, floor mats and so much more. One 6 ounce bottle covers about 10 square feet. Square footage may vary depending on condition of rubber/vinyl.

Learn More