MAC's warehouse is open, shipping daily and ready to meet all of your automotive needs. Learn More

Filter Your Results

Request A FREE Catalog

become a dealer
 

You're currently on:

1932-1947 Early V8 Ford Truck Pickup Car Care, Protection, and Tools

Items 1 to 24 of 29 total Page:
  1. 1
  2. 2
  3. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction
Hinge Pin Removal Tool Kit - Heavy-Duty Forged Steel Body

Includes instructions, heavy-duty forged steel body.


Pre-soaking the hinge pins with your preferred penetrant, along with this tool. will assist in removing those stubborn hinges.


Includes seven push pins of various diameters and lengths.


Makes a tough job easy without damaging the hinge or paint.






Learn More
$27.99 Kit

Add to Wishlist

Oil 600W - For Rear End & Transmission - 1 Quart Bottle

  • This 600 Weight Oil Is Necessary For Many Early Fords
  • It Is Nearly Impossible To Find Locally
  • It Saw Use In Differentials, Transmissions, And Steering Boxes
  • Will Not Attack Brass Or Bronze Parts
  • One Quart


The lubricant used in the early days of motoring up into the thirties was a very heavy clinging type of lubricant known as 600 W Oil. In viscosity it is very much like today’s S. A. E. 250 Gear Oil but is easier on soft metals.  It was used in differentials because full floating rear axles were not in general use, and allowance had to be made in the seals to allow the axle to move up and down as far as a quarter inch. To prevent the oil from leaking at the wheels the lubricant was made to cling to the gears.  The same principle applies to transmissions and steering boxes.  

In today's cars the seals can be made to fit very closely due to better engineering and materials, therefore lighter weight lubricants are used.  The main causes of oil leaking at the rear wheels are worn seals or bearings, but over filling and/or using a lighter weight lubricant than recommended can also cause leaks.  This 600W oil comes in a quart bottle, and it contains no additives that could attack brass or bronze parts. Using this weight lube will help eliminate oil seal leaks.

TIP: Leave rear axle 600W 3/4 inches below filler opening; overfilling is the main cause of rear axle leaks.


Learn More
$9.99 ea.

Add to Wishlist

Engine Paint - Ford Green Enamel - 11 Oz. Spray Can

Dries in minutes. Heat resistant up to 300 degrees F.





This product may appear to be very dark at application. Although colors varied, this is the correct FORD ENGINE GREEN dark green color for Ford engines from 1927-1941. According to judging standards, all engine parts correctly painted Ford Engine green must match. There is no mention of any correct green color.






Learn More
$7.79 ea.

Add to Wishlist

Grease Gun Fitting Adapter - Adapts Modern Grease Gun To Work With Original Style Grease Fittings

Threads onto the end of a grease gun. Eliminates the mess of oozing lubrication.


Provides a positive coupling between lube gun & original, cone style fittings.









Learn More
$4.99 ea.

Add to Wishlist

Engine Paint - Ford Green - 1 Quart Can - Quick-Drying Enamel

Heat resistant up to 300 degrees F.





This product may appear to be very dark at application. Although colors varied, this is the correct FORD ENGINE GREEN dark green color for Ford engines from 1927-1941. According to judging standards, all engine parts correctly painted Ford Engine green must match. There is no mention of any correct green color.






Learn More
$24.99 QT

Add to Wishlist

Spark Plug Compression Adapter - 4 Cylinder Model B

For adapting a modern compression tester to a Model B spark plug hole.






Learn More
$7.99 ea.

Add to Wishlist

Brake Shoe Lining Riveting Tool - Removes and Installs

Great tool, makes a tough job easier.


With detailed instructions.






Learn More
$24.99 ea.

Add to Wishlist

Engine Paint - Ford Blue Enamel - 11 Oz. Spray Can

Quick-drying and heat-resistant.


Also 41-48 Ford Commercial Truck.






Learn More
$9.99 ea.

Add to Wishlist

$10.99 ea.

Add to Wishlist

Gas Tank Etch - 1 Pint Bottle

Use as a prep for your tank, before applying the tank sealer (RSP22A). Removes light buildup of rust from inside the tank & leaves a gray phosphate coating. 1 pint should handle up to a 30-gallon tank. Non-Toxic & Non-Flammable, Bio-Degradable. 16 FL.OZ.












Learn More
$12.99 ea.

Add to Wishlist

Running Board Contact Cement - 1 Pint Can - Neoprene Adhesive

For rubber to metal applications, enough for one car.






Learn More
$16.99 PT

Add to Wishlist

Rear Axle Wheel Puller - Zinc Plated - Knock Off Type - Ford

Remove the rear axle nut & washer, screw on the knock-off tool & hit the end of the tool with a hammer to loosen the wheel.









Learn More
$4.99 ea.

Add to Wishlist

Stromberg Jet Wrench - CNC Milled Stainless - Top Quality

This sturdy wrench will work on original & aftermarket jets. A premium version. Knurled top end for excellent control & a CNC milled pocket for precise accurate fit on the jet end. Cheaper wrenches have a punched end.


A genuine Stromberg brand part, Made in England.















Learn More
$32.99 ea.

Add to Wishlist

Insulating Varnish - 16 Oz. Spray Can

Won't char, crack or deteriorate. Reduces current leakage. Use on generator/ starter armatures & magneto coil assemblies.












Learn More
$8.99 ea.

Add to Wishlist

$12.99 ea.

Add to Wishlist

Alumi Blast - 12 Oz. Spray Can

Restores a new look to sandblasted parts.






Learn More
$9.49 ea.

Add to Wishlist

Dry Graphite Lube - 14 Oz. Spray Can

A fast drying lubricant that forms a thin, black film providing excellent anti-friction & anti-seizure properties to surfaces. All position valve allows can to be sprayed in any position.


Perfect for use between spring leaves, regulator gears, door latches & hood & truck latches.









Learn More
$11.99 ea.

Add to Wishlist

$10.99 ea.

Add to Wishlist

Fuel Stabilizer - 1 Quart Bottle

One ounce will keep 3 gallons of fuel fresh for at least 3 years. This is the ideal formulation to add to the gas tank when storing vehicles for extended periods. It not only prevents varnish and tank corrosion, it has a no-alcohol formula and will not attack rubber lines or diaphragms as many other fuel stabilizers do. Ideal for preserving shelf life of Ethanol (E10) fuels.















Learn More
$30.99 QT

Add to Wishlist

Heater Box Paint - Black Wrinkle Finish - 12 Oz. Spray Can
Heater Box Paint - Black Wrinkle Finish - 12 Oz. Spray Can
Learn More
$10.99 ea.

Add to Wishlist

Aluminum Primer - Green Zinc Phosphate - 12 Oz. Spray Can

For use on galvanized steel, aluminum, white metals & steel.






Learn More
$12.99 ea.

Add to Wishlist

California Water Blade

The original California Jelly Blade. Dry your car in 1/3 the time with this specially designed blade. It is made of super soft medical grade silicone which allows it to mold to virtually any surface, while never scratching your paint. The ergonomic handle makes it easy to use. And the new detailer edge and extender tip allows you to get into all of those hard to reach places. See your beauty shine - order today!












Learn More

Regular Price: $25.99 ea.

Sale Price: $12.46 ea.

Add to Wishlist

Gloss Clear Lacquer - 12 Oz. Spray Can

Use under the hood on hoses, wires, and plastic to get a shiny new appearance.















Learn More

Regular Price: $11.99 ea.

Sale Price: $5.46 ea.

Add to Wishlist

Items 1 to 24 of 29 total Page:
  1. 1
  2. 2
  3. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction

Early V8 Ford Truck Pickup car care is important for the life of your V8 Ford Truck, not to mention maintaining the fresh from the showroom look. That's why MAC's carries a complete selection of car care products for the discriminating Early V8 Ford Pickup owner. All the car care products you could need for restoration and care are right here at MAC's, the one-stop shop for Early V8 Truck owners. MAC's offers Early V8 Ford Pickup Trucks and F1 parts from 1932-1947