Filter Your Results

Request A FREE Catalog

become a dealer
 

You're currently on:

1932-1947 Early V8 Ford Truck Pickup Car Care, Protection, and Tools

Items 1 to 24 of 49 total Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction
3/4" and 13/16" Nylon Lug Nut Protector Set, 2 Pieces


  • Made Of High-Impact Nylon

  • Fits Inside Wrench or Airgun

  • Eliminates Possibility of Damaging 
    Lug Nuts
     

  • Includes 3/4" 
    and 13/16" Sizes

  • Uses 7/8" 
    and 15/16" Sockets


 


Keep those chrome and stainless wheel lug nuts looking like new! Made of high-impact nylon, these lug nut protectors fit inside your wrench or airgun sockets and eliminate the possibility of damaging the finish of your hub bolt nuts when tightening or loosening. Two sizes are included; the 3/4" protector uses 7/8" socket and the 13/16" protector uses a 15/16" socket. 


Learn More
$4.99 Set

Add to Wishlist

Evans Waterless Coolant Prep Fluid 1 Gallon, EC42001


  • Evans Prep Fluid is ready to use—no water required
  • Hygroscopically absorbs water
  • Ensures all residual water is removed from the system
  • Ensures that Evans coolants will meet the water content limits and provide peak performance
  • Protects cooling system metals during flush
  • 1 Gallon 

 



vans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.


For use with all engines being converted to any Evans waterless coolant, after draining 50-50 coolant from the cooling system.


Learn More
$32.99 ea.

Add to Wishlist

Evans High Performance Waterless Coolant, 1 Gallon, EC53001


  • Boiling Point: Above 375°
  • Antifreeze Properties: Protects below -40°F
  • Benefits: Eliminates corrosion and pump cavitation, reduces system pressure, prevents overheating, maximizes BHP
  • Life Span: Protects for life of the engine
  • 1 Gallon

 


 



Evans High Performance waterless coolant is designed for all gasoline and light duty diesel engines. Evans coolant eliminates many problems associated with water in conventional water-based cooling systems, while increasing reliability and engine life. You love your vehicle—it deserves Evans.


Evans High Performance coolant is ready to use—no water required. It contains no silicates or phosphates and requires no Supplemental Coolant Additive (SCA).


HOW IT WORKS

Water is an excellent fluid for cooling as long as it remains in a liquid state, but when water turns to steam it has virtually no capacity for heat transfer. Evans waterless coolant is a superior fluid for transferring heat in engines because it remains in a liquid state until above 375°F—well above the operating temperature of an engine.

Within an engine cooling system, the hottest surfaces are those adjacent to the combustion chamber, specifically the cylinder liners and cylinder head. These hot spots cause water to vaporize, preventing efficient cooling and causing loss of performance and unnecessary engine damage. When the coolant fails in this way the engine becomes even hotter, causing more hot spots and more steam.

Evans waterless coolants will not boil around these engine hotspots, maintaining efficient cooling performance even when the engine is put under extreme conditions. When water turns to steam it pressurizes the cooling system, putting stress on hoses and other components. The significantly higher boiling point of Evans coolants means significantly less pressure than water, resulting in a less stressed cooling system.

Water contains oxygen, which causes corrosion and also allows electrolytic activity which further damages engine metals. Evans waterless coolants eliminate corrosion and electrolytic activity, significantly increasing the life of the engine.


Learn More
$46.99 ea.

Add to Wishlist

Test Light, Six Or Twelve Volt


  • Ideal For Troubleshooting Power & Ground Issues

  • Easy View Sight Glass

  • Long Lead Wire With Alligator Clip





Learn More
$7.99 ea.

Add to Wishlist

POR-15® One Quart OEM Bed Liner Truck Bed Coating


  • Waterproof &
    Stain Resistant

  • Easy Clean Up With Soap &
    Water

  • Prevents Chips &
    Scratches

  • Permanently Flexible &
    Impact Resistant

  • Protect And Preserve Areas Prone To Impact &
    Abrasion

  • 1 Quart Container Will Cover Approximately 2' Of A Standard Pickup Truck Bed

  • Textured Semi-Gloss Black Finish




POR-15® OEM Bed Liner is formulated to provide professional results and performance in a DIY system that can be brushed, rolled or sprayed. POR-15® OEM Bed Liner is a water-based, rubberized coating ideal for protecting truck beds, and all other metal, aluminum, fiberglass, and wood surfaces that are exposed to impact and scuff related environments. Formulated with POR-15® rust preventive technologies POR-15® OEM Bed Liner offers superior adhesion, impact resistance, and flexibility, as well as an attractive, textured semi-gloss black finish that provides the ultimate in truck bed protection. POR-15® OEM Bed Liner is UV stable and will resist damage typically caused by exposure to UV. POR-15® OEM Bed Liner is a low-odor product that can be cleaned up with soap and water and does not have a limiting pot life. Any unused product can be resealed in its container and used later for touch-up or on other projects. For the ultimate in protection apply over POR-15® Rust Preventive Coating.



NOTE: Suitable for use on metal truck beds, tool boxes, fiberglass, tractor beds, rocker panels, wood, aluminum, trailers, metal, boat docks, running boards, van floors, floor pans & More!


Learn More
$31.99 QT

Add to Wishlist

POR-Patch - Black - 4 Oz. Tube

POR-PATCH is a highly concentrated paste form of POR-15, available in a tube. It dries hard as a rock but remarkably remains flexible. Once dry, it is totally impervious to fuels and solvents. With its applicator tube, and thick consistency, it's perfect for seams and holes.


Its incredible formula allows you to bond steel to plastic, wood or concrete!












Learn More
$18.99 ea.

Add to Wishlist

Vinyl & Leather Rejuvenator, Voodoo Blend, Surf City Garage


  • Rejuvenates &
    "Brings Back From The Dead" Dried, Faded &
    Cracked Vinyl &
    Leather
  • Softens &
    Protects With Beeswax &
    Oil-Replenishing Lanolin Blend
  • Provides Long Lasting Color Richness &
    Waterproofing
  • 16 Oz. Bottle


 


Just what the world needs, right? Another line of car wash, waxes and polishes. Well, yes, as long as it is the all-new Surf City Garage brand of cleaning products from MAC's! All of the Surf City Garage products are specifically designed for use on fine classics and muscle cars. This line of top-quality car care products was developed by car enthusiasts just like us. They were developed as a result of his frustration at not being able to obtain just the right washes, waxes and polishes for his personal car collection. The cleaning and car care products from Surf City Garage and MAC's are exactly what you would develop for your cars if you were able to custom design them for your own classic Ford. All of the Surf City Garage products are packaged in attractive containers with images of cars on them - cars just like yours and mine. If we have not convinced you yet, how about this: We use these fine products on our own classic cars and we love them! So, no more using the car care products available at the auto parts store or grocery store on your classic ride. Try the full line of products from Surf City Garage and MAC's, you will love them!


Learn More
$13.95 ea.

Add to Wishlist

Killer Chrome Perfect Polish, Surf City Garage


  • Provides Brilliant Shine & Protection To Chrome Plated Surfaces
  • Will Remove Light Surface Rust & Tarnish
  • 8 Oz. Bottle



Just what the world needs, right? Another line of car wash, waxes and polishes. Well, yes, as long as it is the all-new Surf City Garage brand of cleaning products from Mac's! All of the Surf City Garage products are specifically designed for use on fine classics and muscle cars. This line of top-quality car care products was developed by a car guy just like you and me. They were developed as a result of his frustration at not being able to obtain just the right washes, waxes and polishes for his personal car collection. The cleaning and car care products from Surf City Garage and Mac's are exactly what you would develop for your cars if you were able to custom design them for your own classic. All of the Surf City Garage products are packaged in attractive containers with images of cars on them - cars just like yours and mine. If we have not convinced you yet, how about this: We use these fine products on our own classic cars and we love them! So, no more using the car care products available at the auto parts store or grocery store on your classic ride. Try the full line of products from Surf City Garage and Mac's, you will love them!
Learn More
$11.99 ea.

Add to Wishlist

POR-15® High Build Primer - 1 Quart


  • Developed Specifically To Work With Other POR-15®
    Finishes

  • Works Well With Lacquers, Enamels, and Two-Component Finishes As Well

  • High-Build Characteristcs Cut Down On Finished-Product Blemishes

  • May Be Topcoated After Only 30 Minutes

  • Formerly Called Tie-Coat Primer




 


Now you can prime and paint right over cured POR-15® Rust Preventive Coating with POR-15® High Build Primer. This special "interlocking" primer was developed after many requests from customers who wanted a coating with special adhesion characteristics that make it perfect for most painted surfaces, especially POR-15® Rust Preventive Coating. POR-15® High Build Primer is also highly resistant to penetrating topcoats, like lacquers, enamels, and two-component finishes. It sands very smoothly as well. Try some on your next project.


Learn More
$30.49 QT

Add to Wishlist

POR-15® Cleaner Degreaser - 1 Quart



  • For Preparation Of Bare Metal



  • Water-Based



  • No Residues, Noxious Fumes, Or Flammable Solvents





 


 POR-15® Cleaner Degreaser cleans and degreases in one application without leaving residues, noxious fumes or flammable solvents. No other cleaner works as fast or as well. It makes petroleum-based cleaners almost obsolete because POR-15® Cleaner Degreaser can be diluted with water up to 3, 4, 5 and even 10 times its volume while remaining more potent than other cleaners. POR-15® Cleaner Degreaser removes grease, oil, mildew, algae, musty odors, soap films, wax. Use it to clean canvas, vinyl, nylon, holding tanks, grease traps, auto parts and more. Adhesion is important with most paints but has to be perfect for POR-15 to achieve its maximum effectiveness. A solvent wipe before painting didn't work with POR-15; in the lab it was found to do more harm than good by leaving a residue that didn't help with adhesion or appearance. Someone had to come up with a substance that would clean metal without leaving a residue. That is when POR-15® developed Cleaner Degreaser, and it contradicts all accepted theories about metal prep products: its water-based, not solvent-based and it cleans without leaving residues. In laboratory adhesion tests, the POR-15® Rust Preventive coating using POR-15® Cleaner Degreaser first to clean the bare metal far exceeded every other prep product found in the marketplace.


Formerly known as POR-15 Marine Clean


Learn More
$11.49 QT

Add to Wishlist

POR-15® Metal Prep, Gallon


  • Safe &
    Easy To Use

  • Removes Surface Rust In Minutes!

  • Coats Metal With Zinc Phosphate

  • Provides Perfect Base For All Paints

  • Gives Better Welding Conductivity




 


POR-15® Metal Prep provides the best adhesion for POR-15® on any metal surface, including aluminum and shiny polished metal surfaces. This simple process gently etches metal, creating an ideal anchor pattern for coatings such as those offered by POR-15®, while simultaneously leaving a zinc phosphate coating to ensure chemical bonding of paint and steel. Metal Prep features an easy to use, one-step process with no harmful residues. Is reuseable and removes surface rust in minutes. It then coats metal with the zinc phosphate which is what ensures perfect paint adhesion. This perfect base for all paints also gives better welding conductivity. Avoid other preps that may leave harmful residues which prevent proper adhesion. After thoroughly degreasing your work piece, apply environmentally safe Metal Prep. Metal Prep is not caustic, corrosive, toxic or flammable.


Learn More
$31.99 GL

Add to Wishlist

POR-15® Rubberized Under Coating - 17 Ounce Aerosol


  • Rubberized - Remains Flexible

  • Paintable Once It Dries

  • Will Adhere To Painted And Unpainted Surfaces

  • Texture Will Closely Match Factory Undercoating




POR-15® Rubberized Under Coating™ is a flexible, paintable, black coating. It is the only undercoating with POR-15® Technology and will protect against moisture, dust, heat and cold. It's an excellent moisture barrier for application over auto body repairs and creates an effective sound barrier that reduces vibration and deadens sound in wheel wells, quarter panels, fenders and under carriages. Provides superior adhesion to both painted and unpainted surfaces. POR-15® Rubberized Under Coating™ has superior resistance to road salt and will resist chipping and abrasions. May be used to insulate against engine and muffler noise, protects against dust penetration and exhaust fumes.

POR-15® Rubberized Under Coating™ may also be used on the inside of house gutters and over flashing. Also can be used as a tree dressing after pruning to slow further growth in that area.



 


Learn More
$25.99 ea.

Add to Wishlist

POR-15® Fuel Tank Sealer - 8 Ounces


  • Impervious To All Fuels
  • Does Not Contain Methyl Ethyl Ketone
  • Non-Flammable
  • Environmentally Safe




POR-15® Fuel Tank Sealer was formulated and developed their own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content. POR-15® Fuel Tank Sealer has superior strength and fuel resistance, and does not contain Methyl Ethyl Ketone, a highly flammable and deadly carcinogen (cancer-causing). POR-15® Fuel Tank Sealer is non-flammable and is environmentally safe. 

Formerly U.S. STANDARD FUEL TANK SEALER 


Learn More
$13.49 ea.

Add to Wishlist

Por-15® Rust Paint (Black)-Gallon


  • Great For Auto Restoration, Floors, Chassis, Trunk, Etc...

  • Stops Rust

  • 1 Gallon




Paint right over rust on floor pans, frames, chassis components, or anywhere you see rust developing. Por - 15 is the toughest rust coating available. So tough after applied it will not crack even under the impact of a hammer. Por - 15 is not affected by salt, gasoline, or oil. Por - 15 stops the rust from reaching the base metal. This must be shipped via ground service.


Learn More
$133.99 GL

Add to Wishlist

Evans NPG Waterless Coolant 1/2 Gallon EC10064


  • Boiling Point: Above 375°
  • Antifreeze Properties: Protects below -40°F
  • Benefits: Reduces system pressure, prevents overheating, maximizes BHP, provides unbeatable protection against corrosion and electrolysis
  • Life Span: Protects for the life of the engine

 


 



 


Evans specialty NPG high performance waterless coolant, EC10064, is specifically designed for racing venues that allow propylene glycol based coolants, but not ethylene glycol and food service equipment where ethylene glycol products are contraindicated. Evans waterless coolants have a boiling point above 375 degree and will not vaporize, eliminating overheating, boil-over and after-boil, while generating very low vapor pressures reducing strain on engine cooling system components. Contains no oxygen, effectively eliminating corrosion, liner and cooling pump erosion, resulting in reduced maintenance costs. Eliminates pre-ignition and detonation caused by overheating, reducing downtime, improving combustion efficiency, and delivering more power. Provides low temperature freeze protection with a freezing point below -40F. Evans NPG is the original waterless coolant and is a lifetime coolant. NPG is recommended for racing engines that run on Tracks or in series where there is a "no ethylene glycol" rule, and can be used in high performance street vehicles with high flow cooling systems. NPG is not recommended for daily drivers or cold weather operation, and may require system modifications to ensure a successful conversion. Evans prep fluid should be used to ensure All residual water is removed from the system before adding Evans waterless coolant.


 


HOW IT WORKS

Water is an excellent fluid for cooling as long as it remains in a liquid state, but when water turns to steam it has virtually no capacity for heat transfer. Evans waterless coolant is a superior fluid for transferring heat in engines because it remains in a liquid state until above 375°F—well above the operating temperature of an engine.

Within an engine cooling system, the hottest surfaces are those adjacent to the combustion chamber, specifically the cylinder liners and cylinder head. These hot spots cause water to vaporize, preventing efficient cooling and causing loss of performance and unnecessary engine damage. When the coolant fails in this way the engine becomes even hotter, causing more hot spots and more steam.

Evans waterless coolants will not boil around these engine hotspots, maintaining efficient cooling performance even when the engine is put under extreme conditions. When water turns to steam it pressurizes the cooling system, putting stress on hoses and other components. The significantly higher boiling point of Evans coolants means significantly less pressure than water, resulting in a less stressed cooling system.

Water contains oxygen, which causes corrosion and also allows electrolytic activity which further damages engine metals. Evans waterless coolants eliminate corrosion and electrolytic activity, significantly increasing the life of the engine.


Learn More
$27.99 ea.

Add to Wishlist

POR-15® Fuel Tank Sealer - 1 Pint


  • Impervious To All Fuels
  • Does Not Contain Methyl Ethyl Ketone
  • Non-Flammable
  • Environmentally Safe




POR-15® Fuel Tank Sealer was formulated and developed their own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content. POR-15® Fuel Tank Sealer has superior strength and fuel resistance, and does not contain Methyl Ethyl Ketone, a highly flammable and deadly carcinogen (cancer-causing). POR-15® Fuel Tank Sealer is non-flammable and is environmentally safe. 

Formerly U.S. STANDARD FUEL TANK SEALER 


Learn More
$24.99 PT

Add to Wishlist

Vintage Car High Zinc Motor Oil, SAE30, 6 Quart Case


  • 2000 PPM Zinc For Maximum Camshaft Protection 

  • Formulated With 
    A Unique Blend Of Conventional Base Oils And Performance Additives

  • Enhanced Detergent And Dispersant Levels
  • Reduces Sludge Buildup 
    Left Behind 
    From Years Of Using Inferior Oils
     

  • Viscosity Matches That Which Vintage Engines Were Designed To Expect
  • Not For Vehicles With Catalytic Converters


 


The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come.


Learn More
$65.99 CS

Add to Wishlist

POR-15® Self Etch Primer - 15 Ounce Aerosol

 




  • Developed Specifically To Topcoat Other POR-15® Finishes
  • Quick Drying And Easy-To-Apply
  • Cover With POR-15® Topcoats, Lacquers, Enamels, and Two-Component Finishes
  • May Be Topcoated After Only 15-30 Minutes
  • Not A High-Build Primer


In response to many customer inquiries requesting a quick drying and easy-to-apply coating which enables a restorer to quickly topcoat POR-15® and other basecoats, this POR-15® Self-Etch Primer was developed.  With this product, you can even topcoat POR-15® that's been in place for months or years.  POR-15® Self-Etch Primer is NOT a high-build primer, like POR-15's High Build Primer, but it can be sprayed or brushed on almost any painted surface then can be topcoated in 15-30 minutes. It bonds incredibly well to POR-15® Rust Preventive Paint, and all topcoats bond incredibly well to POR-15® Self-Etch Primer. It can be sanded lightly, and if desired multiple coats may be applied.  
We strongly recommend this fine product, which is available in pints, quarts, and gallons, as well as a large aerosol spray (15 ounces). In situations where you are topcoating a very old POR-15® finish, we first recommend a light sanding with any 280 to 320 grit paper to promote thorough etching. 


Learn More
$35.99 ea.

Add to Wishlist

Vintage Car High Zinc Motor Oil, 10W-40, 1 Quart


  • 2000 PPM Zinc For Maximum Camshaft Protection 

  • Formulated With 
    A Unique Blend Of Conventional Base Oils And Performance Additives

  • Enhanced Detergent And Dispersant Levels
  • Reduces Sludge Buildup 
    Left Behind 
    From Years Of Using Inferior Oils
     

  • Viscosity Matches That Which Vintage Engines Were Designed To Expect
  • Not For Vehicles With Catalytic Converters


 


The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come.


Learn More
$13.99 ea.

Add to Wishlist

Vintage Car High Zinc Motor Oil, 10W-40, 6 Quart Case


  • 2000 PPM Zinc For Maximum Camshaft Protection 

  • Formulated With 
    A Unique Blend Of Conventional Base Oils And Performance Additives

  • Enhanced Detergent And Dispersant Levels
  • Reduces Sludge Buildup 
    Left Behind 
    From Years Of Using Inferior Oils
     

  • Viscosity Matches That Which Vintage Engines Were Designed To Expect
  • Not For Vehicles With Catalytic Converters


 


The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come.


Learn More
$65.99 CS

Add to Wishlist

Por-15® Rust Paint (Silver)-Gallon


  • Great For Auto Restoration, Floors, Chassis, Trunk, Etc...

  • Stops Rust

  • 1 Gallon




Paint right over rust on floor pans, frames, chassis components, or anywhere you see rust developing. Por - 15 is the toughest rust coating available. So tough after applied it will not crack even under the impact of a hammer. Por - 15 is not affected by salt, gasoline, or oil. Por - 15 stops the rust from reaching the base metal. This must be shipped via ground service.


Learn More
$150.99 GL

Add to Wishlist

Interior Detailer Spray, Dash Away, Surf City Garage


  • Spray On For Super-Fast Cleaning

  • Cleans Carpet, Cloth, Vinyl &
    Leather

  • 24 Oz. Spray




Surf City Garage Dash Away Interior Detailer Sprays are designed to get a quick and easy cleaning for the interior of your prized Corvette. These sprays can also be used on carpet, cloth, vinyl and smooth leather due to its incredible effect and total safety. They offer a powerful UV ray protectant and are easy to use. Trust MAC's for all your restoration needs.  


Learn More
$10.99 ea.

Add to Wishlist

POR-15® Solvent - 1 Gallon


  • For Cleanup And Thinning Of POR-15® Coatings
  • Available In Quart And Gallon Sizes
  • Not For Sale Or Use In California




This solvent was developed at the request of the many enthusaistic users of POR-15® coatings.  It is the only appropriate product to use for cleanup, or thinning for spraying.  If you decide to spray and are thinning, please see the directions for the specific coating you use for guidance on what is the best ratio.  Environmental factors like temperature and humidity will affect your finished product, so plan to experiment a little for best results.


Learn More
$41.99 GL

Add to Wishlist

Vintage Car High Zinc Motor Oil, 20W-50, 6 Quart Case


  • 2000 PPM Zinc For Maximum Camshaft Protection 

  • Formulated With 
    A Unique Blend Of Conventional Base Oils And Performance Additives

  • Enhanced Detergent And Dispersant Levels
  • Reduces Sludge Buildup 
    Left Behind 
    From Years Of Using Inferior Oils
     

  • Viscosity Matches That Which Vintage Engines Were Designed To Expect
  • Not For Vehicles With Catalytic Converters


 


The extent of the damage done by using modern oils in vintage engines is the subject of debate, but there is no argument that it has much lower zinc content than what they were designed for.  The oil industry lowered zinc content to help lower harmful emissions, and newer engines are built with that in mind.  The older ones however seem to experience excessive wear in the valve train area. Pushrods, and the contact surface between lifters and camshafts take the worst beating.  Overhead cam engines also wear more where the cam contacts the tappet or valve tip.  Using this Vintage Car Motor Oil® from Surf City Garage gives you a full 2000 parts per million of zinc protection.  It is formulated with a unique blend of conventional base oils and performance additives to help prevent and even correct minor oil leaks, has enhanced detergent and dispersant levels to protect from rust and corrosion that can occur during prolonged storage, and has been seen to reduce sludge buildup left behind from years of using inferior oils.  It comes in three viscosities:  10W-40, 20W-50, and SAE30.  Unlike other options, this is conventional oil in weights most collector vehicle engines were designed to use.  You can purchase these from us by the quart, or in a case of six.  The shelf life on this oil is very long so you can stock up and take care of your pride and joy for years to come.


Learn More
$65.99 CS

Add to Wishlist

Items 1 to 24 of 49 total Page:
  1. 1
  2. 2
  3. 3
  4. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction

Early V8 Ford Truck Pickup car care is important for the life of your V8 Ford Truck, not to mention maintaining the fresh from the showroom look. That's why MAC's carries a complete selection of car care products for the discriminating Early V8 Ford Pickup owner. All the car care products you could need for restoration and care are right here at MAC's, the one-stop shop for Early V8 Truck owners. MAC's offers Early V8 Ford Pickup Trucks and F1 parts from 1932-1947