Request A FREE Catalog

become a dealer
 

You're currently on:

Billet Wheel Adapters, Set Of Four - 1" Thick, 5 x 4.5" With 1/2-20 Thread Studs

Billet Wheel Adapters, Set Of Four - 1" Thick, 5 x 4.5" With 1/2-20 Thread Studs

Click on above image to view full picture(s)


Billet Wheel Adapters, Set Of Four - 1" Thick, 5 x 4.5" With 1/2-20 Thread Studs
Part #: 58-855161-1
Price:
$79.99 Set

Add Items to Cart

DESCRIPTION


  • 1" Thick
  • 1/2-20 Thread Size
  • 5 x 4.5" To 5 x 4.5" Bolt Pattern
  • 74mm Hub Inside Diameter
  • NOT Hub-Centric
  • Includes Five Lug Nuts 
  • Sold As A Set Of 4

 

These wheel adapters are a simple, safe way to move your wheels out away from the body.  They bolt on the original studs, then provide new studs which the wheel attaches to.  Since they are just 1" thick your factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to:

• Shorten the factory studs
• Have wheels which have open slots (cavities) between mounting holes
• Purchase a set of shorter studs and install them in place of the factory studs

They have large 74mm center openings which is larger than most factory hubs.  They are not hub-centric however, so you will want to be sure there is plenty of contact surface on the wheel studs for your lug nuts.  We offer extended-reach lug nuts to help with this but your wheels must be machined from the factory to accept them. The bolt pattern is the common Ford/Mercury 5 x 4.5" which is also sometimes expressed as 5 x 114.3mm or 5 x 115mm.  This listing is for a pair of adapters, but check our other listings for singles and pairs.