MAC's warehouse is open, shipping daily and ready to meet all of your automotive needs. Learn More

Filter Your Results

  1. Car Care, Protection and Tools (5)
  2. Cooling System (1)
  3. Fuel Systems (1)
Store Name
  1. BRO (309)
  2. ECO (318)
  3. EDS (299)
  4. FFC (334)
  5. FFF (335)
  6. FMA (3)
  7. FME (159)
  8. FML (319)
  9. FMP (324)
  10. FMT (157)
  11. FPE (159)
  12. FPL (66)
  13. FTB (19)
  14. MST (333)
  1. Classic Instruments (1)
  2. Metro Moulded SuperSoft (1)
  3. Rust Doctor (1)
  4. Surf City Garage (3)
Price Range
  1. $0.00 to $12.49 (4)
  2. $12.50 to $29.99 (4)
  3. $30.00 to $99.99 (2)
  4. $100.00 to $249.99 (1)
  5. $250.00 to $1999.99 (1)
Request A FREE Catalog

become a dealer

Ford Edsel Parts 1958-60

You're currently on:

7 Item(s) Show per page
View as: Grid  List  Sort by Set Descending Direction
Cold Case Electric Fan Relay Wiring Kit

  • Fan(s) Kick(s) On At 190 Degrees
  • Works On All Aftermarket Electric Fans
  • Recommended For Fan Kit Used On Cold Case Radiators
  • For Single Or Dual Fans 

This electric fan kit turns the fan or fans on at 190 degress and off at 170 degrees. Instructions are included along with wiring connectors, Thermo-sensor, pipe thread adapter and relay.  It can be used with all aftermarket electric fans and is the perfect compliment to our line of Cold-Case fan kits. 
Learn More
$89.99 Kit

Add to Wishlist

Rebuild Service For Ford Installed Holley 4-Barrel Carburetors

  • Quality Rebuild Service
  • Your Rebuildable Core Completely Renewed And Returned To You
  • Designed To Withstand Today's Harsh Fuels
  • For Holley 4-Barrel Carburetors Originally Installed On Ford-Produced Engines

A healthy carburetor is the key to having a car that runs smoothly, consistently, and reliably.  Unfortunately age, lack of use, and the fuels currently available all work together to spoil this.  Often owners of older vehicles are too ready to simply replace an original carburetor with an aftermarket unit on an otherwise stock vehicle.  In doing so they frequently find that new problems have been created, in addition to losing originality.  The Ford Motor Company chose Holley to supply carburetors for some of its most potent engines.  This rebuild service is designed to bring your correct, rebuildable Holley 4-barrel into the 21st century and give you years of faithful service.  It includes a thorough cleaning, the wear-items are replaced, the internal settings are brought to factory specification, and it will be given a cosmetic restoration.  It will be ready to bolt on with a minimum of adjustment, and will withstand fuel with ethanol.  If there is a button that says PRINT SERVICE FORM simply print it and follow the instructions.  If you are using our new website it will allow you to put the service in your cart and then instructions will be provided.  Our experts will take care of the rest and return your carburetor in approximately 4-6 weeks ready-to-go!  Your can count on MAC's/Dearborn Classics for the parts and services you need! 

If there is a red button that says PRINT SERVICE FORM, simply print the form and follow the instructions.  If you are using our new website with all of the cars we offer parts for (, add the item to your shopping cart and check out.  Within hours a Service Form will be emailed to you with instructions on where to ship your part.

Learn More
$299.99 ea.

Add to Wishlist

Evans NPG Waterless Coolant 1/2 Gallon - EC10064

  • Boiling Point: Above 375°
  • Antifreeze Properties: Protects below -40°F
  • Benefits: Reduces system pressure, prevents overheating, maximizes BHP, provides unbeatable protection against corrosion and electrolysis
  • Life Span: Protects for the life of the engine


Evans specialty NPG high performance waterless coolant, EC10064, is specifically designed for racing venues that allow propylene glycol based coolants, but not ethylene glycol and food service equipment where ethylene glycol products are contraindicated. Evans waterless coolants have a boiling point above 375 degree and will not vaporize, eliminating overheating, boil-over and after-boil, while generating very low vapor pressures reducing strain on engine cooling system components. Contains no oxygen, effectively eliminating corrosion, liner and cooling pump erosion, resulting in reduced maintenance costs. Eliminates pre-ignition and detonation caused by overheating, reducing downtime, improving combustion efficiency, and delivering more power. Provides low temperature freeze protection with a freezing point below -40F. Evans NPG is the original waterless coolant and is a lifetime coolant. NPG is recommended for racing engines that run on Tracks or in series where there is a "no ethylene glycol" rule, and can be used in high performance street vehicles with high flow cooling systems. NPG is not recommended for daily drivers or cold weather operation, and may require system modifications to ensure a successful conversion. Evans prep fluid should be used to ensure All residual water is removed from the system before adding Evans waterless coolant.


Water is an excellent fluid for cooling as long as it remains in a liquid state, but when water turns to steam it has virtually no capacity for heat transfer. Evans waterless coolant is a superior fluid for transferring heat in engines because it remains in a liquid state until above 375°F—well above the operating temperature of an engine.

Within an engine cooling system, the hottest surfaces are those adjacent to the combustion chamber, specifically the cylinder liners and cylinder head. These hot spots cause water to vaporize, preventing efficient cooling and causing loss of performance and unnecessary engine damage. When the coolant fails in this way the engine becomes even hotter, causing more hot spots and more steam.

Evans waterless coolants will not boil around these engine hotspots, maintaining efficient cooling performance even when the engine is put under extreme conditions. When water turns to steam it pressurizes the cooling system, putting stress on hoses and other components. The significantly higher boiling point of Evans coolants means significantly less pressure than water, resulting in a less stressed cooling system.

Water contains oxygen, which causes corrosion and also allows electrolytic activity which further damages engine metals. Evans waterless coolants eliminate corrosion and electrolytic activity, significantly increasing the life of the engine.

Learn More
$29.99 ea.

Add to Wishlist

EVANS Analog Refractometer E2196

  • Fast, simple optical method

  • Requires only 1 drop of coolant

  • Compare optical reading to water content chart

  • Handheld

  • Portable




Pre-calibrated for accuracy, this Evans Cooling Refractometer is designed to accurately test for residual water content. By determining the water content you'll be able to safely set up your cooling system with Evans Cooling products.

Learn More
$29.99 ea.

Add to Wishlist

Evans Waterless Coolant Prep Fluid 1/2 Gallon, EC42064

  • Evans Prep Fluid is ready to use—no water required
  • Hygroscopically absorbs water
  • Ensures all residual water is removed from the system
  • Ensures that Evans coolants will meet the water content limits and provide peak performance
  • Protects cooling system metals during flush
  • 1/2 Gallon


Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.

For use with all engines being converted to any Evans waterless coolant, after draining 50-50 coolant from the cooling system.

Learn More
$22.99 ea.

Add to Wishlist

Deltran Battery Tender Plus - 12 Volt @ 1.25 Amps

  • Safe, Reliable, Trouble-Free Battery Care
  • Developed To Maintain Batteries Not In Constant Use Or In Storage
  • Fully Automatic
  • Used With Flooded Or AGM Batteries
  • 10-Year Manufacturer's Warranty
    Not Sold In California Or Oregon Per Deltran


This great battery maintainer automatically switches off after fully charging and then keeps a storage charge.  It constantly monitors the battery without the damaging effects of trickle charging. The initial charge cycle of the Battery Tender brings a battery to a full charge at approximately 14.4 volts or about 1.25 amps. What this means to the user is safe, reliable, trouble free battery care. This Battery Tender features steel and aluminum construction.  It is equipped with a 6' power cord, and a 6' output cord with clamps. There is a 10-year manufacturer's warranty.


Learn More
$64.99 ea.

Add to Wishlist

7 Item(s) Show per page
View as: Grid  List  Sort by Set Descending Direction