MAC's warehouse is open, shipping daily and ready to meet all of your automotive needs. Learn More

Filter Your Results

Currently Shopping by

  1. Remove This Item Category: Front Body Panels
Brand
  1. Dennis Carpenter (3)
  2. Metro Moulded SuperSoft (2)
Price Range
  1. $0.00 to $12.49 (2)
  2. $12.50 to $29.99 (2)
  3. $30.00 to $99.99 (5)
  4. $100.00 to $249.99 (10)
  5. $250.00 to $1999.99 (2)
Request A FREE Catalog

become a dealer
 

You're currently on:

1949-1959 Late Ford & Mercury Front Body Panels

Items 1 to 21 of 25 total Page:
  1. 1
  2. 2
  3. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction
Windshield Cowl Drain Tubes - Black Rubber - Ford Only
Windshield Cowl Drain Tubes - Black Rubber - Ford Only
Learn More
$17.99 PR

Add to Wishlist

Headlight Patch Panel - Below Headlight - Right - Ford

Unless otherwise noted, patch panels are stamped from 19 to 20 gauge cold-rolled steel. The statement, Genuine Ford, indicates parts manufactured by Ford Motor Company. All other parts are reproduction parts. Some listed sheet metal parts have multiple applications and may require minor cutting or modification to accommodate your particular vehicle. All sheet metal requires fitting for proper placing. With the exception of fender skirts, all sheet metal requires welding to accomplish installation. Painted or otherwise modified sheet metal is not returnable regardless of the reason.






Learn More
$73.99 ea.

Add to Wishlist

Headlight Patch Panel - Below Headlight - Left - Ford

Unless otherwise noted, patch panels are stamped from 19 to 20 gauge cold-rolled steel. The statement, Genuine Ford, indicates parts manufactured by Ford Motor Company. All other parts are reproduction parts. Some listed sheet metal parts have multiple applications and may require minor cutting or modification to accommodate your particular vehicle. All sheet metal requires fitting for proper placing. With the exception of fender skirts, all sheet metal requires welding to accomplish installation. Painted or otherwise modified sheet metal is not returnable regardless of the reason.






Learn More
$63.99 ea.

Add to Wishlist

Cowl Vent Anti-Squeak - U Shaped - Ford Only
Cowl Vent Anti-Squeak - U Shaped - Ford Only
Learn More
$7.49 Set

Add to Wishlist

Ford Passenger Car Under Headlight Repair Panel, Right, 1949-1951

  • A High Quality Repair Panel

  • 18 Gauge Die-Stamped Steel

  • Includes All Original Style Shapes, Curves, and Flanges

  • Driver's Side Also Available

  • Left And Right Side Pair Available At Reduced Cost

  • Made In The USA


This repair panel has been needed by many as this area of the popular 'Shoebox' Fords is very prone to rust and damage. It is difficult to fabricate a decent replacement so we are pleased to offer one of this quality. The 18 gauge steel is die-stamped and has all original style shapes, curves, and flanges for ease of installation. It is simply the best, most cost-effective way to repair this area. They are made in the USA. You can count on MAC's for the parts needed for your favorite Ford!
Learn More
$87.99 ea.

Add to Wishlist

Cowl Vent Anti-Squeak - Round - Ford Only
Cowl Vent Anti-Squeak - Round - Ford Only
Learn More
$4.99 ea.

Add to Wishlist

Inner Front Fender Battery Tray Section, Ford And Mercury, 1957-1958, Edsel, 1958


  • Made In the USA

  • Replaces A Commonly Rusted Area

  • Made From Heavy 18 Gauge Steel




Unfortunately rust is common in the battery area of many 1957 and 1958 Fords and Mercurys and 1958 Edsels. Many restorers were forced to patch this area back together due to lack of good rust-free options. MAC's is happy to announce this section which will allow a proper repair in this area. It is made from 18 Gauge steel in the USA! This repair panel completely replaces the front half of the OEM inner fender extending from the radiator support back to the cut-out for the a-arm. It is full-height too! MAC's remains committed to finding and offering the parts you need to do the job right.

Learn More
$279.99 ea.

Add to Wishlist

Ford Passenger Car Under Headlight Repair Panel, Left, 1949-1951

  • A High Quality Repair Panel

  • 18 Gauge Die-Stamped Steel

  • Includes All Original Style Shapes, Curves, and Flanges

  • Passenger Side Also Available

  • Left And Right Side Pair Available At Reduced Cost

  • Made In The USA


This repair panel has been needed by many as this area of the popular 'Shoebox' Fords is very prone to rust and damage. It is difficult to fabricate a decent replacement so we are pleased to offer one of this quality. The 18 gauge steel is die-stamped and has all original style shapes, curves, and flanges for ease of installation. It is simply the best, most cost-effective way to repair this area. They are made in the USA. You can count on MAC's for the parts needed for your favorite Ford!
Learn More
$87.99 ea.

Add to Wishlist

Headlight Mounting Panel - Right - Ford


  • Headlight Mounting Panel

  • Holds Headlight Bucket In Place

  • Die Stamped 18 Gauge Steel

  • Made In The USA




 


This is the front headlight mounting panel that holds the headlight bucket in place and is a typical rust area. This part is often replaced at the same time as the front fender upper cap. Die stamped from 18 guage steel and proudly made in the U.S.A. For all of your classic Ford restoration needs, count on MAC's. 


 


NOTE: This panel fits the 57 Fairlane only.


Learn More
$185.99 ea.

Add to Wishlist

Headlight Mounting Panel - Lower Section - Left - Ford


  • Headlight Mounting Panel

  • Holds Headlight Bucket In Place

  • Made In 2 Sections (Upper &
    Lower)

  • Die Stamped 18 Gauge Steel

  • Made In The USA




 


This is the front headlight mounting panel that holds the headlight bucket in place and is a typical rust area. This part is often replaced at the same time as the front fender upper cap. The 58 headlight mounting panel is made in 2 sections, an upper and a lower. Die stamped from 18 guage steel and proudly made in the U.S.A. For all of your classic Ford needs, count on MAC's.


Learn More
$144.99 ea.

Add to Wishlist

Headlight Mounting Panel - Upper Section - Left - Ford

This piece fits under the top front portion of the fender.





Except for the most pampered '57 and '58 Fords, rust is common in the front fenders. We've all seen the headlight area rust through and know that the lower rear traps water and creates a rust hole. We now have the best fitting die-stamped 18 gauge sheet metal panels for both of those fender repairs. The upper cap includes the front lip of the fender and extends completely from the outside of the fender upper body line to the beginning of the hood. The headlight mounting panel holds the headlight bucket in place. The lower rear has the proper bead at the wheel opening and we even include the inner fender brace.





Some listed sheet metal parts have multiple applications and may require minor cutting or modification to accommodate your particular vehicle. All sheet metal requires fitting for proper placing. With the exception of fender skirts, all sheet metal requires welding to accomplish installation. Painted or otherwise modified sheet metal is not returnable regardless of the reason.






Learn More
$144.99 ea.

Add to Wishlist

Headlight Mounting Panel - Left - Ford


  • Headlight Mounting Panel

  • Holds Headlight Bucket In Place

  • Die Stamped 18 Gauge Steel

  • Made In The USA




 


This is the front headlight mounting panel that holds the headlight bucket in place and is a typical rust area. This part is often replaced at the same time as the front fender upper cap. Die stamped from 18 guage steel and proudly made in the U.S.A. For all of your classic Ford restoration needs, count on MAC's. 


 


NOTE: This panel fits the 57 Fairlane only.


Learn More
$185.99 ea.

Add to Wishlist

Headlight Mounting Panel - Lower Section - Right - Ford


  • Headlight Mounting Panel

  • Holds Headlight Bucket In Place

  • Made In 2 Sections (Upper &
    Lower)

  • Die Stamped 18 Gauge Steel

  • Made In The USA




 


This is the front headlight mounting panel that holds the headlight bucket in place and is a typical rust area. This part is often replaced at the same time as the front fender upper cap. The 58 headlight mounting panel is made in 2 sections, an upper and a lower. Die stamped from 18 guage steel and proudly made in the U.S.A. For all of your classic Ford needs, count on MAC's.


Learn More
$144.99 ea.

Add to Wishlist

Headlight Mounting Panel - Upper Section - Right - Ford

This piece fits under the top front portion of the fender.





Except for the most pampered '57 and '58 Fords, rust is common in the front fenders. We've all seen the headlight area rust through and know that the lower rear traps water and creates a rust hole. We now have the best fitting die-stamped 18 gauge sheet metal panels for both of those fender repairs. The upper cap includes the front lip of the fender and extends completely from the outside of the fender upper body line to the beginning of the hood. The headlight mounting panel holds the headlight bucket in place. The lower rear has the proper bead at the wheel opening and we even include the inner fender brace.





Some listed sheet metal parts have multiple applications and may require minor cutting or modification to accommodate your particular vehicle. All sheet metal requires fitting for proper placing. With the exception of fender skirts, all sheet metal requires welding to accomplish installation. Painted or otherwise modified sheet metal is not returnable regardless of the reason.






Learn More
$144.99 ea.

Add to Wishlist

Lower Front Quarter Outside Moldings, Stainless Steel, LeftAnd Right Side Pair, Fairlane 500, 1957


  • Polished Stainless Steel

  • Fits Body Styles: 63A, 64B and 76.

  • Comes With All Required Hardware And Clips




Finally available in high-quality polished Stainless Steel are these moldings for 1957 Fairlane 500's. They are for the front of the quarter panels just behind the door 'checkmark' (part 49-74554-1). MAC's remains committed to finding and offering the parts you need to do the job right.

Learn More
$260.99 PR

Add to Wishlist

Custom 300 Upper Front Quarter Outside Moldings, Stainless Steel, Left And Right Side Pair, 1957


  • Polished Stainless Steel

  • Fits Body Styles: 59B 70B And 66B With Two-Tone Paint

  • Comes With All Required Hardware And Clips




Finally available in high-quality polished Stainless Steel are these moldings for 1957 Custom 300's. They are the moldings that are directly behind the door above the gold trim inserts. MAC's remains committed to finding and offering the parts you need to do the job right.

Learn More
$110.99 PR

Add to Wishlist

Ford Passenger Car Under Headlight Repair Panel, Left And Right, 1949-1951

  • A High Quality Repair Panel

  • 18 Gauge Die-Stamped Steel

  • Includes All Original Style Shapes, Curves, and Flanges

  • Individual Sides Also Available

  • Made In The USA


These repair panels have been needed by many as this area of the popular 'Shoebox' Fords is very prone to rust and damage. It is difficult to fabricate decent replacements so we are pleased to offer ones of this quality. The 18 gauge steel is die-stamped and they have all original style shapes, curves, and flanges for ease of installation. It is simply the best, most cost-effective way to repair this area. They are made in the USA. You can count on MAC's for the parts needed for your favorite Ford!
Learn More
$159.95 Kit

Add to Wishlist

Cowl Fresh Air Duct - 6 Long - 3-5/8 ID - 3-7/8 OD - Mercury Only
Cowl Fresh Air Duct - 6 Long - 3-5/8 ID - 3-7/8 OD - Mercury, Only
Learn More
$35.25 ea.
Discontinued

Add to Wishlist

Headlight Patch Panel - Upper - 5 Long - Right - Ford

Unless otherwise noted, patch panels are stamped from 19 to 20 gauge cold-rolled steel. The statement, Genuine Ford, indicates parts manufactured by Ford Motor Company. All other parts are reproduction parts. Some listed sheet metal parts have multiple applications and may require minor cutting or modification to accommodate your particular vehicle. All sheet metal requires fitting for proper placing. With the exception of fender skirts, all sheet metal requires welding to accomplish installation. Painted or otherwise modified sheet metal is not returnable regardless of the reason.






Learn More
$129.99 ea.
Discontinued

Add to Wishlist

Headlight Patch Panel - Upper - 5 Long - Left - Ford

Unless otherwise noted, patch panels are stamped from 19 to 20 gauge cold-rolled steel. The statement, Genuine Ford, indicates parts manufactured by Ford Motor Company. All other parts are reproduction parts. Some listed sheet metal parts have multiple applications and may require minor cutting or modification to accommodate your particular vehicle. All sheet metal requires fitting for proper placing. With the exception of fender skirts, all sheet metal requires welding to accomplish installation. Painted or otherwise modified sheet metal is not returnable regardless of the reason.






Learn More
$157.99 ea.
Discontinued

Add to Wishlist

Cowl Side Seals - Black Rubber - 9-1/4 Long - Mercury Only
Cowl Side Seals - Black Rubber - 9-1/4 Long - Mercury Only
Learn More
$21.99 PR
Discontinued

Add to Wishlist

Items 1 to 21 of 25 total Page:
  1. 1
  2. 2
  3. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction