Filter Your Results

Currently Shopping by

  1. Remove This Item Category: Exhaust
  2. Remove This Item Price Range: $30.00 to $99.99
Request A FREE Catalog

become a dealer
 

You're currently on:

Ford Mustang Exhaust Parts and Exhaust Systems

Items 1 to 24 of 207 total Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction
Stainless Steel Exhaust Wrap Locking Tie Kit


  • Perfect For Securing Exhaust Wrap

  • Narrow Profile To Fit Into Tight Spots

  • Easy-To-Use Slide-Through Fasteners

  • Cut To Fit For Exact Lengths

  • Withstands Up To 2,000 Degrees

  • Includes 
    Eight 9" Straps 
    &
     
    Four 18" straps

  • Sold As A Kit Only 

  • Made In The U.S.A.




 


Thermo-Tec snap strap kits are multi-purpose, high-temperature, stainless steel fasteners used to secure exhaust insulating wrap and more, with no tools needed. The straps have a narrow profile to fit tight spots, and are pre-cut to fit most primary tube and collector diameters. The straps design makes them easy to use and with a tough multi-lock system they will hold securely in place. This kit includes a total of eight 9" straps and four 18" straps for multiple applications. Trust MAC's for all of your classic Ford restoration and performance needs. 


Learn More
$46.99 Kit

Add to Wishlist

1964-1966 Mustang 2" Single Exhaust Hanger Kit for V8


  • Fits 1964 to 1966 Ford Mustang

  • Ford Mustang exhaust hanger kit,

  • V8 single exhaust mount kit 2”




These exhaust products are of premium quality and made to original factory specifications in the USA.  All of our products have been test fitted on the appropriate Mustang prior to production to insure a trouble free installation.


Learn More
$49.99 ea.

Add to Wishlist

1967 Mustang 1-3/4" Single Exhaust Hanger Kit, 6-Cylinder


  • Fits 1967 Ford Mustang
  • Trouble Free Installation


All of our products have been test fitted on the appropriate Mustang prior to production to insure a trouble free installation


Learn More
$90.99 ea.

Add to Wishlist

$90.99 ea.

Add to Wishlist

1968-1970 Mustang 2" Single Exhaust Hanger Kit, V8


  • Fits 1964 To 1973 Ford Mustang
  • Fits 1965 To 1970 Ford Shelby
  • Made In USA


 


Learn More
$61.99 ea.

Add to Wishlist

1968-1970 Mustang 2-1/4" Single Exhaust Hanger Kit,


  • Fits 1968 to 1970 Ford Mustang
  • Trouble Free Installation
  • Made In USA




All of our products have been test fitted on the appropriate Mustang prior to production to insure a trouble free installation


Learn More
$61.99 ea.

Add to Wishlist

Black Speed Sleeve Exhaust Sleeve Kit, 4 and 6-Cylinder

  • Serves as an insulator and radiant heat barrier
  • Quick and simple installation
  • Supplied wrap covers pipes up to 2-1/4" diamater
  • Includes 8" wide exhaust wrap, lock fasteners and Locking Ties
  • 12 ft. of 8 in. wrap for 4 & 6 Cylinder


Speed Sleeves provide everything you need to cover and protect primary exhaust header pipes. An alternative to wrapping complete headers and ideal for spot protection from heat generating pipes and manifolds. They are easily installed in tight engine compartments. Great for trouble shooting specific components that are close to the exhaust header like ignition wires or fuel line.
Learn More
$93.99 ea.

Add to Wishlist

Pipe Wrap & Locking Ties Kit - Black - 2 in x 25 ft

  • Wrap header tubes to protect plug wires
  • Wrap downpipes to improve velocity
  • Wrap sections of exhaust & tail pipe to reduce heat from entering vehicle interior
  • Wrap motocycle pipes to prevent leg burns


DEI Pipe Wrap is used in many types of applications for reducing unwanted and harmful heat under the hood and from entering the driver compartment while improving horsepower.

Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's RV's heavy duty truck & tow vehicles, as well as in many non-automotive applications.

Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.
Learn More
$31.99 ea.

Add to Wishlist

Pipe Wrap & Locking Ties Kit - Tan - 2 in x 25 ft

  • Wrap header tubes to protect plug wires
  • Wrap downpipes to improve velocity
  • Wrap sections of exhaust & tail pipe to reduce heat from entering vehicle interior
  • Wrap motocycle pipes to prevent leg burns


DEI Pipe Wrap is used in many types of applications for reducing unwanted and harmful heat under the hood and from entering the driver compartment while improving horsepower.

Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's RV's heavy duty truck & tow vehicles, as well as in many non-automotive applications.

Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.
Learn More
$30.99 ea.

Add to Wishlist

Pipe Wrap & Locking Ties Kit - Titanium - 2 in x 25 ft

  • Wrap header tubes to protect plug wires
  • Wrap downpipes to improve velocity
  • Wrap sections of exhaust & tail pipe to reduce heat from entering vehicle interior
  • Wrap motocycle pipes to prevent leg burns


DEI Pipe Wrap is used in many types of applications for reducing unwanted and harmful heat under the hood and from entering the driver compartment while improving horsepower.

Pipe wrap improves performance and can be used on everyday vehicles, motorcycles, street rods, muscle cars, SUV's RV's heavy duty truck & tow vehicles, as well as in many non-automotive applications.

Kit includes one roll of 2" x 25' exhaust wrap & four 8" stainless steel locking ties to secure wrap.
Learn More
$35.99 ea.

Add to Wishlist

Stainless Lock Tie Kit
Locking Ties are perfect for securing wrap to pipes with it's self-locking design. Locking Ties offer many other uses including bundling wires, hoses, and other forms of insulation products. Just slide end into locking mechanism and pull tight.
Learn More
$30.99 ea.

Add to Wishlist

Cool Cover - Air Tube Cover Kit

  • Reflects heat from air tubes
  • Promotes cooler air charge for added power
  • Installs and removes in seconds for show or go
  • Fits up to 4-1/2" diameter tubing
  • Includes: 36" x 14" insulation material & 2" x 24" strip of heat reflective sealing tape


Cool Cover is designed to prevent air tubes from becoming heat sinks. Made of heat treated glass fiber with a reflective coating, Cool Cover will reflect radiant heat from air tubes and promotes a cooler, denser, more powerful air charge. With a unique full length hook & loop closure design, Cool Cover can be removed in seconds without the need of any hand tools!
Learn More
$75.99 ea.

Add to Wishlist

Muffler Shield Kit. 42” x 24”

  • Greatly reduce radiant heat from muffler
  • Cooler interior
  • Protect from damaging heat
  • Kit includes


The Best muffler shield/wrap on the market.
Based off our proven Floor and Tunnel II heat
shield, our new Muffler Shield is designed to
wrap around just about any size muffler. Includes
our tough Stainless Steel positive locking ties
for a tight secure installation. Made from 10mil
dimpled aluminum with a 1/8” needle glass
insulator it can be easily trimmed to fit most
mufflers. Greatly reduces radiant heat coming
off your muffler resulting in a cooler interior and
protection from damaging heat.
Learn More
$54.99 ea.

Add to Wishlist

Fire Sleeve & Tape Kit 1" I.D. x 3'

  • Includes a 16" length of Fire Tape
  • Insulates wiring, hoses, oil / brake / transmission lines & more
  • Withstands 500°F continuous / 2000°F intermittent heat
  • Burn protection during under hood repairs and maintenance
  • Use for bundling and protecting hoses, electrical wiring etc.


Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F.

Each kit includes a 16-inch length of black Fire Tape to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look.
Learn More
$39.99 ea.

Add to Wishlist

Protect-A-Boot and Wire Kit - Silver - 8 Cylinder

  • 25 Feet of Protect-A-Wire sleeving
  • 25 Hi-Temp Shrink Tubes
  • 8 Protect-A-Boots
  • Available in 4 colors


Each kit includes everything needed to protect spark plug boots and wires from harmful under hood heat. Color matched Protect-A-Boots, Protect-A-Wire and Hi-Temp Shrink Tubes are included for a professional finished look.
Learn More
$98.99 ea.

Add to Wishlist

Protect-A-Boot and Wire Kit - Black - 8 Cylinder

  • 25 Feet of Protect-A-Wire sleeving
  • 25 Hi-Temp Shrink Tubes
  • 8 Protect-A-Boots
  • Available in 4 colors


Each kit includes everything needed to protect spark plug boots and wires from harmful under hood heat. Color matched Protect-A-Boots, Protect-A-Wire and Hi-Temp Shrink Tubes are included for a professional finished look.
Learn More
$98.99 ea.

Add to Wishlist

Protect-A-Boot and Wire Kit - Red - 8 Cylinder

  • 25 Feet of Protect-A-Wire sleeving
  • 25 Hi-Temp Shrink Tubes
  • 8 Protect-A-Boots
  • Available in 4 colors


Each kit includes everything needed to protect spark plug boots and wires from harmful under hood heat. Color matched Protect-A-Boots, Protect-A-Wire and Hi-Temp Shrink Tubes are included for a professional finished look.
Learn More
$98.99 ea.

Add to Wishlist

Protect-A-Boot and Wire Kit - Blue - 8 Cylinder

  • 25 Feet of Protect-A-Wire sleeving
  • 25 Hi-Temp Shrink Tubes
  • 8 Protect-A-Boots
  • Available in 4 colors


Each kit includes everything needed to protect spark plug boots and wires from harmful under hood heat. Color matched Protect-A-Boots, Protect-A-Wire and Hi-Temp Shrink Tubes are included for a professional finished look.
Learn More
$98.99 ea.

Add to Wishlist

Lite N Boltz LED License Plate Lighting Kit Satin Dome Head (4-pc.)


  • Meets legal requirements without compromising great looks


  • Made of high-grade stainless steel


  • Offer superior lighting


  • Clear epoxy covered lens-waterproof protection


  • .30MA current, 0.36 watts


  • Lights instantly


  • Perfect for license plate relocation projects


  • Four piece kits include two LED's and two license plate mounting bolts and nuts. Thread Size: 5/16-18 x 3/4" (National coarse thread)

 



LED License Plate Lighting Kits with their right-angle LED, are extremely efficient and emit a much higher degree of light in a desired location than incandescent lamps. Since there's no filament that can be damaged, LEDs are incredibly durable-virtually shock and vibration-proof.
Learn More
$31.99 ea.

Add to Wishlist

Lite'N Boltz LED License Plate Lighting Kit Polished Dome Head (4-pc.)


  • Meets legal requirements without compromising great looks


  • Made of high-grade stainless steel


  • Offer superior lighting


  • Clear epoxy covered lens-waterproof protection


  • .30MA current, 0.36 watts


  • Lights instantly


  • Perfect for license plate relocation projects


  • Four piece kits include two LED's and two license plate mounting bolts and nuts. Thread Size: 5/16-18 x 3/4" (National coarse thread)




LED License Plate Lighting Kits with their right-angle LED, are extremely efficient and emit a much higher degree of light in a desired location than incandescent lamps. Since there's no filament that can be damaged, LEDs are incredibly durable-virtually shock and vibration-proof.
Learn More
$35.99 ea.

Add to Wishlist

Lite'N Boltz LED License Plate Lighting Kit Polished Dome Head (2-pc.)


  • Meets legal requirements without compromising great looks


  • Made of high-grade stainless steel


  • Offer superior lighting


  • Clear epoxy covered lens-waterproof protection


  • .30MA current, 0.36 watts


  • Lights instantly


  • Perfect for license plate relocation projects

 



LED License Plate Lighting Kits with their right-angle LED, are extremely efficient and emit a much higher degree of light in a desired location than incandescent lamps. Since there's no filament that can be damaged, LEDs are incredibly durable-virtually shock and vibration-proof.
Learn More
$31.99 ea.

Add to Wishlist

Lite'N Boltz LED License Plate Lighting Kit Polished Acorn Head (2-pc.)


  • Meets legal requirements without compromising great looks


  • Made of high-grade stainless steel


  • Offer superior lighting


  • Clear epoxy covered lens-waterproof protection


  • .30MA current, 0.36 watts


  • Lights instantly


  • Perfect for license plate relocation projects

 



LED License Plate Lighting Kits with their right-angle LED, are extremely efficient and emit a much higher degree of light in a desired location than incandescent lamps. Since there's no filament that can be damaged, LEDs are incredibly durable-virtually shock and vibration-proof.
Learn More
$38.99 ea.

Add to Wishlist

NHRA Blow Down Tube Kit

  • Vents nitrous away from bottle


Converts factory valve vent fitting to NHRA blow down tube
Learn More
$93.99 ea.

Add to Wishlist

Items 1 to 24 of 207 total Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction

When it's time to repair, replace, or rebuild your 1964-1973 Ford Mustang exhaust system, MAC's is the number one place to go. MAC's has a huge variety of stock exhaust systems, Ford Mustang performance exhaust systems, and exhaust parts for your car. There's no better place in the nation to shop for exhaust system parts. MAC's carries parts for 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Ford Mustangs.