Request A FREE Catalog

become a dealer
 

You're currently on:

Ford Mustang Fuel System Parts

Items 1 to 24 of 988 total Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction
1970-1973 Mustang Intake Manifold Gasket Set, 351C V8 with 2-Barrel Carburetor
Ford Mustang Intake Manifold Gasket Set - 351 Cleveland V-8,With 2 Barrel Carburetor
Learn More
$23.99 Set

Add to Wishlist

Mr. Gasket 3-Piece Weatherpack Electrical Connector Tool Kit


  • 3-Piece Weatherpack Tool Kit

  • Ideal for Assembly &
    Removal of Weatherpack &
    OE-Style Electrical Connectors

  • Includes (2) Picks (.050” &
    .090” wide) &
    (1) Pin Extraction Tool

  • Plastic Handles w/ Metal Pin Extraction Tip &
    Picks

  • Saves Time and Hassle

  • Work w/ Most Electrical Connectors Found On: MSD &
    Holley Distributors, EFI Wiring Harnesses &
    Other Components


 


These pin extraction tools work on Weatherpack, Weather-Tite, and many OEM connectors.  They are designed to release and extract the terminals from the connector housing when wiring or repairing your vehicle. This is a 3-piece set with a narrow pick, a wide pick, and tubular shaped extraction tool.


Learn More
$9.99 Set

Add to Wishlist

POR-15 Gas Tank Repair Kit



    • Ideal For Saving Metal Tanks With Minor Leaks

    • Everything You Need To Do The Job Right

    • Easy To Use


 


The POR-15® kit outperforms ordinary kits because it is a complete kit that goes to the root of leaks and bonds to the metal, whereas other products simply cover the leak. The kit includes POR-15 Cleaner Degreaser™ to remove gum, sludge and varnish, POR-15 Metal Prep™ to remove rust and prepare the tank for sealer, and POR-15 Fuel Tank Sealer™ to permanently seal the tank. The tank must be removed from the vehicle to perform the repair. Due to Federal regulations, this kit cannot be shipped by air.


Learn More
$78.99 Kit

Add to Wishlist

1970-1973 Mustang Intake Manifold Gasket Set, 351C V8 with 4-Barrel Carburetor
Ford Mustang Intake Manifold Gasket Set - 351 Cleveland V-8,With 4 Barrel Carburetor
Learn More
$44.99 Set

Add to Wishlist

1969-1970 Mustang Fuel Pump Rebuild Kit, Boss 302 and 428/429 CJ/SCJ V8
This kit allows you to repair that factory original carter fuel pump with the screwed together body, commonly found on the 428cj/scj, 429 cj, and boss 302/429 motors.

1967 and later 428cj/scj, 429 cj, and boss 302/429 motors


Learn More
$46.99 Kit

Add to Wishlist

1964-1973 Mustang Carburetor Mounting Kit, 4 Pieces

Special thin design nuts like the originals for the base.






Learn More
$5.99 Set

Add to Wishlist

Edelbrock 1032 Two Barrel Carb Non Progressive Throttle Linkage Kit 2X2

  • TWO BARREL CARB NON PROGRESSIVE THROTTLE LINKAGE KIT 2x2


These throttle linkage kits are a non-progressive linkage for Edelbrock 94â„¢ carburetors. They are available for dual, triple and six carburetor set-ups and are adjustable to fit various carb spacing. These are the most complete kits on the market - including return spring and bracket, linkage with provision for kick down and throttle connection. Edelbrock 94â„¢ carburetors are equipped with an extended length throttle shaft, making these kits a bolt-on to Edelbrock 94â„¢ carbs
Learn More
$105.99 ea.

Add to Wishlist

Edelbrock 1033 Carburetor Two-Barrel Progressive Throttle Linkage Kit 3X2

  • Carburetor Two-Barrel Progressive Throttle Linkage Kit 3x2


C-357-B TRIPLE-DEUCE (IDLE-5500 RPM) Designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180° firing order port runner arrangement. It contains an exhaust gas heat crossover and offers excellent performance potential. #5418/#5419 has machined front oil filler tube pad with boss. #5418 is machined for 3-bolt carburetors. Carb center-to-center: 5-1/2". Use with Performer-Plus camshaft and lifter kit #2103 for low-end torque or Torker-Plus cam/kit #5002 for top-end power. #5418 & #5419 accept Oil Fill Tube and Breather #4803.
Learn More
$143.99 ea.

Add to Wishlist

Edelbrock 1034 Carburetor Two-Barrel Non-Progressive Throttle Linkage Kit, 3X2

  • Carburetor Two-Barrel Non-Progressive Throttle Linkage Kit
  • 3x2


Throttle linkage kits offer progressive and non-progressive adjustable linkage for Edelbrock 94 carburetors. Edelbrock 94 carburetors are equipped with an extended-length throttle shaft for a super-easy bolt-on installation. These kits are available for dual and triple carburetor setups.
Learn More
$148.99 ea.

Add to Wishlist

$29.99 ea.

Add to Wishlist

1964-1985 Mustang Edelbrock 12410 4-Barrel Carburetor Mounting Gasket Kit with Studs

  • HDQ Carburetor Gasket
  • Mounting Gasket with Studs


Single-quad manifold and carb kit; Performer RPM Air-Gap manifold w/800CFM Thunder Series carb; carb/fuel line/intake bolts/gaskets; natural finish; for oval port big block Chevy; not legal for sale or use on pollution controlled motor vehicles, legal for use on pre-pollution controlled vehicles, for vehicles manufactured before emission control regulations were imposed, vehicles pre-emmision regulations are considered uncontrolled vehicles~ for engines transplanted into an uncontrolled or pre-pollution vehicle, not legal for use on pollution controlled vehicles, for pre-pollution controlled vehicles or engine swaps
Learn More
$25.99 ea.

Add to Wishlist

1964-1985 Mustang Edelbrock 12412 Vacuum Secondary Spring Kit, Holley 4150/4150HP/4160 Series

  • HDQ Vacuum Secondary Spring Kit
  • 7-Piece
  • For Use with 4150/4150HP/4160 and Demon


Single-quad manifold and carburetor kit; Performer RPM Air-Gap manifold w/800CFM Thunder Series carburetor; carburetor/fuel line/intake bolts/gaskets; natural finish; for rect port big block Chevy; not legal for sale or use on pollution controlled motor vehicles~ legal for use on pre-pollution controlled vehicles~ for vehicles manufactured before emission control regulations were imposed~ vehicles pre-emmision regulations are considered uncontrolled vehicles~ for engines transplanted into an uncontrolled or pre-pollution vehicle~ not legal for use on pollution controlled vehicles~ for pre-pollution controlled vehicles or engine swaps.
Learn More
$17.99 ea.

Add to Wishlist

1964-1985 Mustang Edelbrock 12600 Needle and Seat Hardware Kit for Center-Hung Fuel Bowls

  • HDQ Needle and Seat Hardware Kit
  • For Use with Center-Hung Fuel Bowls


These needle and seat assemblies will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes needle and seat assembly, two gaskets and oneo-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon carbs.
Learn More
$7.99 ea.

Add to Wishlist

1964-1985 Mustang Edelbrock 12750 Carburetor Rebuild Kit, Holley 4160

  • HDQ Rebuild Kit
  • For Use with 4160 Style Carburetors


Edelbrock now offers replacement service parts for popular high performance quick fuel, Holley and Demon carburetors. These component packages will feature quick reference guides for easy identification and proper application selection. See complete list below for these items and contact your distributor for availability and pricing. Don't leave your customers with empty shelves.
Learn More
$32.99 ea.

Add to Wishlist

1964-1985 Mustang Edelbrock 12760 Carburetor Rebuild Kit, Holley 4150

  • HDQ Rebuild Kit
  • For Use with 4150 Style Carburetors


Edelbrock now offers replacement service parts for popular high performance quick fuel, Holley and Demon carburetors. These component packages will feature quick reference guides for easy identification and proper application selection. See complete list below for these items and contact your distributor for availability and pricing. Don't leave your customers with empty shelves.
Learn More
$43.99 ea.

Add to Wishlist

Edelbrock 1842 Calibration Kit For 1825/1826

  • Calibration Kit For 1825/1826


All calibration kits include an assortment of metering rods and jets, one pair of metering rod retaining springs and a complete assortment of step-up springs.
Learn More
$64.99 ea.

Add to Wishlist

Edelbrock 1840 Calibration Kit For 1805/1806

  • Calibration Kit For 1805/1806


All calibration kits include an assortment of metering rods and jets, one pair of metering rod retaining springs and a complete assortment of step-up springs.
Learn More
$63.99 ea.

Add to Wishlist

Edelbrock 1841 Calibration Kit For 1812/1813

  • Calibration Kit For 1812/1813


All calibration kits include an assortment of metering rods and jets, one pair of metering rod retaining springs and a complete assortment of step-up springs.
Learn More
$78.99 ea.

Add to Wishlist

Edelbrock 72950 Remote Electric Arming Valve Kit

  • Remote Electric Arming Valve Kit


Allows you to open and close the bottle valve with the flip of a switch from inside the drivers compartment.
Learn More
$208.99 ea.

Add to Wishlist

Edelbrock 1486 Jet/Rod Kit For 1403/1404

  • Jet/Rod Kit For 1403/1404


Chamber Size 60cc; Single; 1.90" Intake Valves; Requires Pushrods PN# 9632; Street Legal; Bare; 50-State Street Emissions Legal~ Requires Head Bolt Bushings PN[9680] And OE Bolts Or Head Bolt Kit PN[8552]~ Will Not Accept Rail Rockers~ Recommend Edelbrock Gskt PN[7313] Head; PN[1250] Intake;PN[1415] Exhaust~ 50 State Legal~ Has a California Air Resources Board (C.A.R.B.) Executive Order E.O. Number~ Meets The Emission Standard For Use On Pollution Controlled Vehicle~ 50 State Legal For The Vehicles Listed On The E.O.~ To Review OR download E.O. For Your Application Visit www.edelbrock.com/eo.
Learn More
$66.99 ea.

Add to Wishlist

Edelbrock 1487 Jet/Rod Kit For 1406

  • Jet/Rod Kit For 1406


Chamber Size 60cc; Single; 1.90" Intake Valves; Requires Pushrods PN# 9632; Street Legal; Complete; 50-State Street Emissions Legal~ Requires Head Bolt Bushings PN[9680] And OE Bolts Or Head Bolt Kit PN[8552]~ Will Not Accept Rail Rockers~ Recommend Edelbrock Gskt PN[7313] Head; PN[1250] Intake;PN[1415] Exhaust~ 50 State Legal~ Has a California Air Resources Board (C.A.R.B.) Executive Order E.O. Number~ Meets The Emission Standard For Use On Pollution Controlled Vehicle~ 50 State Legal For The Vehicles Listed On The E.O.~ To Review OR download E.O. For Your Application Visit www.edelbrock.com/eo.
Learn More
$48.99 ea.

Add to Wishlist

Items 1 to 24 of 988 total Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next Page
Show per page
View as: Grid  List  Sort by Set Descending Direction

The Ford Mustang fuel system has changed a lot over the years of 1964-1973 Ford Mustang vehicles, and finding the right parts for your Ford Mustang can be difficult. At MAC's, we have a great variety of fuel systems and fuel system parts, including carburetors and fuel injectors. MAC's is one of the most trusted names in fuel system parts because of our selection and quality. MAC's carries parts for 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, and 1974 Ford Mustangs.