1953-56 Ford Pickup TCI Complete IFS Chassis, Front Coil Springs-Rear Parabolic Leaf Springs

• Small Block Engine Mounts Pre-Mounted
• Automatic Transmission Mounts Pre-Mounted
• Tubular A-Arms
• 2" Drop Spindles
• Springs & Shocks
• Rear Parabolic Leaf Springs With Shocks
• Power Steering Rack
• Front And Rear Sway Bar Kits
• 11" Smooth/Vented Brake Rotors
• Big-Bore Brake Calipers
• Power Brake Pedal Assembly
• Stainless Steel Hardlines Pre-Plumbed
• Stainless Steel Flexlines Pre-Plumbed
• 9" Rear End Housing With Nodular Iron Case
• 3.00, 3.25, 3.50, 3.70, 3.89, 4.11, 4.30 Or 4.56 Gear Ratio
• 31-Spline Axles
• 11" Drum Brakes
• Complete Boxed Frame With Center Section
• All Crossmembers Installed
• Frame Retains The Factory Profile For Easier Of Mounting The Body
• Heli-Arc Welded For The Highest Quality
• Limited Lifetime Manufacturer Warranty
• Proudly Made In The U.S.A.
   

To build the best, start with the best! The best engineered chassis makes it much easier to build the strongest and safest street rod possible. TCI's 1953-1956 Ford truck frame features main rails with an extended height from 6" to 8" for increased rigidity and clearance between upper and lower cross-members while still retaining the original profile for easy mounting of the cab and bed. The redesigned center cross-member allows more room for even the biggest exhaust system to clear.

TCI's custom independent front suspension system is a no-nonsense, no-compromise performance set-up based on their own custom spindle design. The geometry is specifically engineered to maximize cornering grip, yet provide great street manners for everyday cruising. The new parabolic leaf spring kit moves the leaf springs closer to the frame rail making room for wider wheel and tire packages. It also provides your vehicle with excellent strength, extreme durability, proven quality, greater flexibility, and better fuel mileage with less vehicle weight (28% weight savings) so it will not rob your classic car or truck of valuable performance.

Just like all TCI Engineering products, this chassis comes with a limited lifetime warranty and all parts are proudly made in the USA! This complete chassis has been engineered for strength, safety, performance, drive-ability, and ride-ability. Talk about a solid foundation to build off of! Count on MAC's to provide you with the highest quality parts that you want and need for your prized classic Ford truck.

NOTE: "Show Package" displayed (powder coating is not included).

1953-1956 Ford Truck TCI complete chassis, Mustang II IFS with rear parabolic leaf springs is the ultimate handling performance upgrade for your vintage truck