1969-1973 Mustang Champion 3-Row Aluminum Radiator, 302/429 V8

• All Aluminum Champion 3-Row Radiator With Fittings
• Cools Up To Approximately 700 Horsepower
• High-Flow Design With 3 Rows Of 5/8" Tubing
• 100% TIG Welded Seams With Brazed Cores (No Epoxy)
• Thick Billet Fill Neck With TIG Welded Base (Not Pressed In)
• 50%-75% Lighter Than Typical Copper/Brass Radiator
• Includes 16 Lb. Radiator Cap, Transmission Cooler & Brass Petcock Valve
• ISO Certified Manufacturing For Consistent Premium Quality
• Limited Lifetime Manufacturer Warranty

Your classic Ford Mustang can get hot... really hot! Driving and idling in traffic on 90+ degree summer days can push your stock cooling system to its limits... and unfortunately, beyond. Factory brass radiators are barely satisfactory at transferring heat, which is why they overheat when you least expect it. Why take chances with your valuable engine? Step up to Champion's all-aluminum, high efficiency radiator. Aluminum alloy is a far superior metal to the original equipment copper-brass construction because it dissipates (or "radiates") heat much more quickly and cools down much more rapidly. Heat transfer from your engine to the atmosphere is greatly increased, thereby lowering the temperature of the engine coolant dramatically. An aluminum radiator will out-cool a copper brass radiator of similar size and construction by at least 40%. As a bonus, it's 50-75% lighter than your typical brass/copper radiator. Install this Champion high efficiency aluminum radiator in your classic and make cooling problems a thing of the past! Trust MAC's for all your Ford Mustang restoration, accessory, and performance needs.

DIMENSIONS: 20" tall with cap x 32" wide.

CORE: 17.5" tall x 26" wide x 2" thick.

INLET: 1.5" passenger side.

OUTLET: 1.5" driver side.

TANKS: 3" thick.

TUBES: 0.63" thick.

NOTE: One 16" or two 12" electric fans are recommended for this core size.

1971-73 Ford Mustang Champion 2-Row Aluminum Radiator For 302/429 V8