1978-79 Bronco Champion Aluminum Radiator, 2-Row Core

• Bracket-Mounted All Aluminum Champion 2-Row Radiator With Fittings
• Cools Up To Approximately 550 Horsepower
• High-Flow Design With 2 Rows Of 5/8" Tubing
• 100% TIG Welded Seams With Brazed Cores (No Epoxy)
• Thick Billet Fill Neck With TIG Welded Base (Not Pressed In)
• 50%-75% Lighter Than Typical Copper/Brass Radiator
• Includes 16 Lb. Radiator Cap, Transmission Cooler & Brass Petcock Valve
• ISO Certified Manufacturing For Consistent Premium Quality
• Limited Lifetime Manufacturer Warranty

Your classic Ford can get hot... really hot. Driving and idling in traffic on 90+ degree summer days can push your stock cooling system to its limits... and beyond. Factory brass radiators are barely satisfactory at transferring heat, which is why they overheat when you least expect it. Why take chances with your valuable engine? Step up to Champion's all-aluminum, high efficiency radiator. It's aluminum alloy construction is far superior to the original equipment copper-brass radiator because it dissipates heat much more quickly and cools down much more rapidly. Heat transfer from your engine to the atmosphere is greatly increased, thereby lowering the temperature of the engine coolant dramatically. An aluminum radiator will out-cool a copper brass radiator of similar size and construction by at least 40%. It also weighs 50-75% lighter than your typical brass/copper radiator. Install this Champion high efficiency aluminum radiator in your classic and make cooling problems a thing of the past! Trust MAC's for all your Ford restoration, accessory, and performance needs.

Dimensions: 20.75" tall (21.25" with cap) x 22.25" wide (with brackets)

Core: 16" tall x 19.5" wide x 2.5" thick

Inlet: 1.5" passenger side

Outlet: 1.75" passenger side

Tanks: 3" thick

Tubes: 0.63" thick

1978-79 Bronco Champion Aluminum Radiator, 2-Row Core