High-Torque - 180 Ft. Lb. - Starter, Mastertorque, 66-70 Ford V8 Engines

• For Use With Ford FE Engines 352 390 427 428 429
• 4.4:1 Gear Reduction Ratio 
• Ideal for engines with 12:1 Compression Ratio 
• No heat soak or hot start problems 
• Machined Aluminum adapter block is very lightweight yet strong 
• Adjustable mounting block 
• Allows for plenty of clearance in the engine bay  

Important Information about this Starter:

If you're using an aftermarket bellhousing and/or adapter, always refer to the manufacturer's specifications and recommended starter.

Please also be aware that upgrading your starter means that you must make sure your classic Ford's electrical system can handle the increased voltage requirements. PowerMaster recommends the minimum voltage required for this starter is 9.5 Volts, and some starter upgrades can demand up to 500 Amperes from the system.

Please be sure to read the directions carefully when installing.

NOTE: Please do not enlarge any holes or grind anything to make this unit fit.

If your classic Ford is used for mild racing or high-performance street applications, or if heat soak and hot start are concerns of yours, then the 180 Foot-Pounds of torque produced by the MasterTorque, by PowerMaster, is what you need! Available to you from the best selection of engine parts and starting systems at MAC's, this starter unit will overcome sluggish engines or higher-compression requirements (12:1 compression is optimal for this starter). As an added bonus, you can even dial-in the starter drive using the unique InfiCLOCK system, which allows you to mount the starter where YOU need it and have the starter drive always positioned perfectly, without having to find a "best-fit" setting and then having to work the other systems around the starter. Get your PowerMaster MasterTorque starter in a one-stop-shop and at the lowest price around with MAC's Antique Auo Parts!

180 Ft.-Lbs.