Cowl Lamp Wire Support/30-31

• L-Shaped Brackets OnFirewall with Grommet
• 1930-31 Only

These L-shaped wire brackets are used to support the cowl light wire on all cars, and the vacuum line for open cars. 3 of these are used on closed cars, one at each inside top corner of the cowl (secured by the cowl welting screw and the inside top left terminal box screw). Open cars used 2 brackets for cowl light wires, at each inside top corner of the cowl (secured by the top rivet of the cowl brace). 3 brackets are also required for the vacuum line, one at the top left terminal box screw, left cowl welt screw and on the rear most gas tank clamp. For 1930-1931 cowl light wires, a black lacquered loom (A14429) covered the wire from cowl light to cowl light and the rubber grommet in the bucket was not used.